Skip to main content
 

Une diversité colorée

Teintes standard, dorées ou spéciales ?

Pad printing inks and additives

Highest quality for every colour – even with special effects

Teca-Print Slider Farbe - Farbfaecher - Tampondruckfarbe bunt gemischt

The variety of available shades is enormous and offers the right solution for every requirement. All our colour series impress with their high brilliance and opacity.

At Teca-Print, we offer standard ink tones as well as mixed colours, with which special colours can be mixed according to the standard colour systems (e.g. RAL or Pantone). We also offer metallic effect colours, fluorescent colours and colours with special effects. The 4C process colours (CMYK) are available for « photo prints ».

Would you like to benefit from our ink mixing service?
Please click here for further information.

Redirect:

Ink types

Ink properties

Additives

Alternative applications

Contact

A suitable ink type for every substrate

Teca-Print Farbe mit Viscospatula mischen

Our range of ink series is as varied as the different materials.

To ensure that your print not only looks good, but also achieves optimum adhesion, our range of different ink types is constantly growing. New materials and applications are constantly conquering the market. Accordingly, we are also developing our ink series together with renowned ink manufacturers, improving them or adding a new ink type to the range. We would be happy to provide you with comprehensive advice and carry out ink tests with various ink types for you.

different ink series for different materials
consulting and ink adhesion tests
permanent development of ink series and formulations
suitable additives for every ink type

Ink properties: 1- or 2-component inks, solvent-based or UV LED inks

Teca-Print Farbe mischen, blaue Farbe umruehren mit Viscospatula

Our pad printing inks are available with different properties.

Pad printing inks are generally solvent-based. Depending on the type of material to be printed, either 1-component or 2-component ink series are used. 1-component inks dry purely physically by evaporation of the solvent, while 2-component inks also have a chemical reaction that cross-links the ink film with the substrate. Some ink series can be applied in both 1- and 2-component versions.

Alternatively, LED UV pad printing inks are available. The solvent content of these inks is lower than that of conventional pad printing inks. LED drying is required to match the print object and ink.

1-component inks with physical drying
2-component inks with physical drying and chemical cross-linking reaction
LED UV inks with reduced solvent content

Additives

Fiche produit des accessoires et consommables Teca-Print

Additives are used to adjust the pad printing inks ready for printing and for specific applications.

Additives play a key role in pad printing, because in addition to the basic function of ensuring the correct viscosity or adding hardener for a 2-component application, other ink properties can also be influenced.

The wide variety of additives available makes it possible to adjust the ink to different processing parameters or special application requirements, such as indoor or outdoor use or other environmental influences.

Additives are available in a wide variety
allowing for different processing parameters depending on the application
different additives for different individual ink requirements

Alternative applications

Pad printing is ideal for transferring various other media, such as adhesives, greases, pastes or varnishes.

One important area, for example, is « printed electronics ». The conductive pastes can also be printed directly onto uneven, three-dimensional surfaces. Pad printing therefore offers possibilities that no other printing process can match.

pad printing is also suitable for the transfer of other media
Teca-Print is an expert in the field of « printed electronics » and will be pleased to assist you
the combination of pad printing with other processes is also possible and leads to new application possibilities – contact us!

Pad printing impresses with brilliant, highly opaque colours.

You are welcome to contact us using the form below:

    Your name (mandatory field)

    Your email address (mandatory field)

    Your company (mandatory field)

    Your country

    I would like to receive information regarding:

    Are you looking for ink for a specific application, do you have information about the material of your print object or would you like to send us any other information? You are welcome to send us your message here:

    Teca-Print Farbmischbecher mit Farbe

    Teca-Print pad printing inks are usually supplied in one litre or one kg tins. The practical Teca-Print ink tubes of 200 ml or 200 g are also available for many ink series and colour shades.

    Special colours, which are mixed especially for you, are usually already available in small quantities of 500 ml or 500 g.

    Teca-Print pad printing inks are ready for printing at the time of delivery, but must be stirred thoroughly and then adjusted to the desired viscosity. For 2-component inks, the hardener must be mixed in well before the thinner is added.

    Please contact us using the contact form, by e-mail or phone. We will be happy to send you further information or give you personal assistance.

    The interaction between the appropriate ink, the matching printing pad, the cliché and the machine is decisive for a good printing result.

    contact us by e-mail

    you can reach us also by phone

    return to overview accessories

    Close Menu